Click image to view full size image
Fiber Optic Terminal Equipment Original MA5608T GPON or PON OLT equipment
Huawei 19 Inch Mini OLT MA5608T EPON GPON OLT Equipment
Product Positioning
The SmartAX MA5600T/MA5603T/MA5608T is a multi-service access module launched by Huawei.
MA5600T/MA5603T/MA5608T Positioning
The MA5600T/MA5603T/MA5608T, functioning as an integrated optical-copper access equipment, provides the integrated broadband and narrowband access and FTTx optical access services that feature high rate, high bandwidth, and high quality. It can function as an OLT, MSAN, or IP DSLAM. The MA5600T is a large-capacity device, the MA5603T is a medium-capacity device and the MA5608T is a small-capacity device.
-
Supports the 10G GPON/GPON access service. All the three can function as an optical line terminal (OLT) in the GPON system, working with the optical network terminal (ONT) or other optical network units (ONUs).
-
Supports the point-to-point (P2P) FE/GE optical access. The P2P board is mainly used for cascading, and it can also provide users with P2P FTTH access by cooperating with ONTs.
-
Provides the voice service solution based on the Session Initiation Protocol (SIP) and H.248, supports the POTS port to implement the voice service, fax service, narrowband modem service, and various supplementary services.
-
Provides the E1/N*64k private line service through the TDM SHDSL board. And H802EDTB board supports the TDM SHDSL feature.
-
Supports broadband access services such as ADSL2+, VDSL2, and SHDSL, enhancing the xDSL function.
In the upstream direction, the device is generally connected to the IP/MPLS network through the Ethernet (GE/10GE) port.
Figure 1 shows the position of the device in a network.
Figure 1 Typical network of the MA5600T/MA5603T/MA5608T(OLT)
<
|
CPE: customer premise equipment |
MDU: multi-dwelling unit |
|
ONT: optical network terminal |
P2P: point to point |
|
STM: synchronous transfer mode |
VoIP: voice over IP |
|
NGN: next generation network |
IMS: IP multimedia core network subsystem |
The MA5608T has a strong adaptability to the environment and can be deployed quickly. In FTTx networks, the OLT is moved closer to the user side, which can save backbone optical cable resources. This solves the problem of a few users, when FTTx services are applied in an area with a low population density.
-
Deployed at the remote end, including the base stations (BSs) and outdoor environments
-
2 U high, and supports a maximum of two service boards
-
Connected to ONUs or ONTs and used in FTTB/C and FTTH scenarios
-
Connected to xDSL terminals and phones and used in the MSAN/DSLAM scenario
MA5603T(functioning as MDU) Positioning
Furthermore, the MA5603T can also be cascaded to other OLT in the upstream direction in the GPON mode, functioning as an MDU in the network.
The difference between the MA5603T as the OLT and the MDU in the network:
-
As the MDU, the upstream with the P2CA board.
-
As the OLT, the upstream with the GIU boards but P2CA.
Figure 2 Typical network of the MA5603T (functioning as MDU)
Appearance
The MA5608T is 2 U high.
Figure 1 Appearance of the MA5608T chassis(xDSL)
Figure 2 Appearance of the MA5608T chassis(GPON)
Specifications
This topic provides the dimensions, weight, and power consumption of the MA5608T chassis.
Table 1 Dimensions and weight of the MA5608T
|
Item |
Specification |
|
Dimensions (W x D x H, excluding mounting brackets) |
442mm×244.5mm×88.1mm |
|
Dimensions (W x D x H, including mounting brackets of IEC standard) |
482.6mm×244.5mm×88.1mm |
|
Dimensions (W x D x H, including mounting brackets of ETSI standard) NOTE: ETSI standard dimension is to add the ETSI mounting bracket on the IEC mounting bracket. |
535mm×244.5mm×88.1mm |
|
Weight (empty chassis) |
3.55kg |
Table 2 Power parameters of the MA5608T
|
Parameter |
Specification |
|
Power supply mode |
DC or AC |
|
Rated voltage |
DC power supply: -48 V / -60 V AC power supply: 110 V / 220 V |
|
Working voltage range |
DC power supply: -38.4 V to -72 V AC power supply: 100 V to 240 V |
|
Maximum input current |
DC power supply: 10 A AC power supply: 6 A |
Table 3 Power consumption of the MA5608T chassis (Unit: W)
|
Typical Configuration |
Static Power Consumption |
Maximum Power Consumption |
Typical Power Consumption |
Board Configuration |
|
ADSL2+ |
78.5 |
225.5 |
152 |
H801MCUD*2+H801MPWC+ H831FCBB+H805ADPD*2 |
|
VDSL2 |
104.5 |
257.5 |
181 |
H801MCUD*2+H801MPWC+ H831FCBB+H80BVDPM(17a)*2 |
|
POTS |
86.5 |
-(1) |
121 |
H801MCUD*2+H801MPWC+ H831FCBB+H808ASPB*2 |
|
P2P |
194.5 |
293.5 |
244 |
H801MCUD*2+H801MPWC+ H831FCBB+H802OPGD*2 |
|
GPON (H805GPBD) |
140.5 |
191.5 |
166(2) |
H801MCUD*2+H801MPWC+ H831FCBB+H805GPBD*2 |
|
GPON (H806GPBH) |
118.5 |
185.5 |
152(2) |
H801MCUD*2+H801MPWC+ H831FCBB+H806GPBH*2 |
|
GPON (H802GPFD) |
144.5 |
239.5 |
192(2) |
H801MCUD*2+H801MPWC+ H831FCBB+H802GPFD*2 |
NOTE:
The maximum power consumption of the subrack is tested in the following conditions:
-
-53.5 V DC
-
Ambient temperature of 25°C
-
Static power consumption: power consumption of the powered-on equipment with no load (all user ports are deactivated)
-
Maximum power consumption: power consumption of the powered-on equipment with full services
-
Typical power consumption: power consumption of a device when 50% of its users are online
-
(1)In the typical application of voice services, the convergence ration is 25%. The maximum power consumption of an H808ASPB board is calculated based on the 25% convergence ratio. Therefore, the typical power consumption (instead of maximum power consumption) is obtained for an H808ASPB in voice service configurations. The maximum power consumption of the other service board is calculated based on the 100% convergence ratio.
-
(2)The PON port that are not connected to any users should be disabled when you calculate the typical power consumption.
-
You can calculate the power consumption based on the formula with the boards supported by the product version when the upper boards is not supported.
Configuration
This topic provides the configuration of the boards in the MA5608T chassis, and lists the type of the boards. Table 1 shows the configuration of boards in the MA5608T chassis.
Figure 1 Configuration of boards in the MA5608T chassis 
Table 1 Boards in the MA5608T chassis
|
Slot Type |
Slot |
Supported Board |
Remarks |
|
Control board slot |
2, 3 |
Control board |
Two slots must be configured with the same control board. |
|
Power board slot |
4 |
Power board |
- |
|
Service board slot |
0, 1 |
Service board |
Mixed configuration of service boards is supported. |
Boards
This topic describes the type, name, slot and mapping of the boards supported by the MA5608T.
Table 1 describes the boards supported by the MA5608T.
NOTE:
-
In the table, "Yes" indicates "supported" and "No" indicates "not supported".
-
This manual describes the supply of boards supported by the product. However, the availability of the boards is subject to the PCNs. For the availability of the boards, contact product mangers at Huawei representative offices.
Table 1 Boards supported by the MA5608T
|
Board Name |
Board Mapping |
||
|
H801MCUD |
H801MCUD1 |
H801MCUE |
|
|
Control board |
|||
|
H801MCUD |
- |
- |
- |
|
H801MCUD1 |
- |
- |
- |
|
H801MCUE |
- |
- |
- |
|
Power interface board |
|||
|
H801MPWC |
Yes |
Yes |
Yes |
|
H801MPWD |
Yes |
Yes |
Yes |
|
ADSL2+ service access board |
|||
|
H808ADPM |
Yes |
Yes |
No |
|
H805ADPD |
Yes |
Yes |
No |
|
H80BADPE |
Yes |
Yes |
No |
|
Combo board |
|||
|
H80BCAME |
Yes |
Yes |
No |
|
H80BCVME |
Yes |
Yes |
No |
|
Voice board |
|||
|
H802DSRD |
Yes |
Yes |
No |
|
H802DSRE |
Yes |
Yes |
No |
|
H808ASPB |
Yes |
Yes |
No |
|
H809ASPB |
Yes |
Yes |
No |
|
H802EDTB |
Yes |
Yes |
No |
|
VDSL2 service access board |
|||
|
H80AVDPD |
Yes |
Yes |
No |
|
H80BVDQM |
Yes |
Yes |
No |
|
H80BVDPM |
Yes |
Yes |
No |
|
H80BVDPE |
Yes |
Yes |
No |
|
SHDSL service access board |
|||
|
H80ASHLM |
Yes |
Yes |
No |
|
H802SHGM |
Yes |
Yes |
No |
|
GPON service access board |
|||
|
H805GPBD |
Yes |
Yes |
No |
|
H802GPFD |
Yes |
Yes |
Yes |
|
H806GPBH |
Yes |
Yes |
Yes |
|
H801GPMD |
No |
No |
Yes |
|
10G GPON service access board |
|||
|
H802XGBC |
Yes |
Yes |
No |
|
Ethernet service access board |
|||
|
H801ETHB |
Yes |
Yes |
Yes |
|
SPU board |
|||
|
H801SPUB |
Yes |
Yes |
Yes |
|
H801SPUF |
Yes |
Yes |
Yes |
|
TDM service process board |
|||
|
H801TOPA |
Yes |
Yes |
Yes |
|
P2P interface board |
|||
|
H802OPGD |
Yes |
Yes |
Yes |
|
H802OPGE |
Yes |
Yes |
Yes |
http://www.ftthtech.com/